info@chinanewvision.com +86-17191109819

Silicone Fluid (And) Gum Blends

  • Cyclopentasiloxane (and) Dimethiconol
  • Cyclopentasiloxane (and) Dimethiconol
Cyclopentasiloxane (and) DimethiconolCyclopentasiloxane (and) Dimethiconol

Cyclopentasiloxane (and) Dimethiconol

  • NV-PC3011
  • INCI Name:Cyclopentasiloxane (and) Dimethiconol
  • CAS no: 541-02-6 and 70131-67-8
  • Viscosity(cps):5000-8000
  • Product description: Cosmetic Silicone fluid,methicone. A blends of volatile silicone oil and Dimethiconol gum polymer.

Product Name:NV-PC3011 Cosmetic SilFluid

INCI Name:Cyclopentasiloxane (and) Dimethiconol

Model name:NV-PC3011

CAS no: 541-02-6 and 70131-67-8

Typical properties:

Appearance:Colorless viscous liquid,free from lumps

Odour:Slight characteristic odour


Refractive Index:1.39-1.40

Flash point:>70℃


A blend of volatile cyclopentasiloxane D5 and a very high viscosity dimethiconol gum polymer.

Forms a water-resistant film and a breathable skin protection barrier,but no greasy feeling;

Gives soft velvety skin feel;

Conditions hair, especially split ends,Anti-frizz & curl definition;

Improves wet combing for haircare;

Long lasting effects, resistant to wash off;

Improves spread;

When used in deodorants: Long lasting fragrance retention capacity (up to 24 hrs) ;Immediate drying; No burning sensation ;Soft and smooth feel;

Preference over alcohol when used in deodorant formulation.


It is a concentrate,that allows the addition of a silicone gum to a wide range of personal care formulations.It can be further diluted in volatile silicone and is miscrible with mineral oil.

Widely used in cosmetic and toiletry applications such as:

Skin Care;

Color Cosmetics;

Sun Care;

Hair Care;

Shower Gels;

Antiperspirants and Deodorants.

1.Emulsion products:

Can be incorporated directly into the oil phase of the formulation.

If temperatures above 70°C are being used to melt the oil phase, it should be added slowly after the formation of the emulsion, and  below 60°C ,using a high shear mixer.

2.Non-emulsion products:

It is advisable to add cosmetic ingredients to the silicone and not vice versa as often high viscosity dimethiconol is incompatible with other cosmetic ingredients.

Recommended dosage:0.5%-100% depending on applications.


Product should be stored at or below 25°C (77°F) in original,unopened containers.

Avoid contact with acid, alkali and other impurities. Do not contact naked fire.

Storage period is 1 years. After the storage period, it should be rechecked,the qualified products can be used.


Max. 20kg/drum or 200kg drum or as request.